|
Product Details:
|
| Branch: | Cisco | Type: | Router Modules |
|---|---|---|---|
| PN: | HWIC-4T1/E1 | Details: | 4 Port HWIC Serial High-Speed WAN Interface Card |
| Specificaiton: | 4 Port HWIC | Condition: | New With 1Year Warranty |
| Highlight: | cisco spa module,cisco router cards |
||
HWIC-4T1/E1 Cisco Router High-Speed WAN Interface Card with 4 Port Clear Channel T1/E1
1. Overview
Features At-A-Glance
• 4 ports of RJ-48 connectors
• Cisco IOS Software configurable for T1 or E1 operation
• Integrated CSU/DSU per port
• Balanced or unbalanced E1 termination in the same module
• E1 unframed and framed modes (G.703 and G.704)
• Independent clocking for each port
• Multilink PPP or Multilink Frame Relay (FRF.16) for T1/E1 ports on the same module and across different modules
| Cisco 4 Port Clear Channel T1/E1 High Speed WAN Interface Card(HWIC-4T1/E1) | |
| Manufacturer | Cisco |
| Part Number | HWIC-4T1/E1 |
| Device Type | Expansion module |
| Form factor | Plug-in module |
| Interfaces/Ports | 4 x RJ-48C T1/E1 WAN |
| Data Transfer Rate |
1.54 Mbps T1 2.05 Mbps E1 |
| Management Features | |
| Management |
• Supported by Cisco WAN Access Performance Management System (WAPMS) • Cisco CNS 2100 Series Intelligence Engine (IE2100) • CiscoWorks |
| Diagnostic Loopback Support |
• E1 loopback modes • Controller local loopback • Interface local loopback • T1 loopback modes • Interface local loopback • Interface remote loopback • Controller local loopback • Controller remote loopback • CSU loopback modes for T1 CSU • Data terminal equipment (DTE) loopback • Network loopback • Payload loopback |
| Alarm Detection |
• Yellow alarm: Receive/send from/to network • Blue alarm: Receive alarm indication signal (AIS) from network • Red alarm: Loss of network signal |
| Relevant MIB Support |
• RFC1406-MIB • CISCO-ICSUDSU-MIB |
| Signaling Debugging |
• ISDN Q.921 and Q.931 decode • All other previously existing applicable Cisco IOS Software debugs |
| Dimensions (H x W x D) | 0.75 x 3.08 x 4.74 in. (1.91 x 7.82 x 12.04 cm) |
| Weight | 0.20 lb (0.09kg) |
| Operating Temperature |
32 to 104°F (0 to 40°C) 14 to 131F (-10C to 55C when installed in the MWR-2941-DC) |
| Relative Humidity | 5 to 95% noncondensing |
| Regulatory Compliance and Safety | |
| Telecom Compliance |
• United States: FCC Part 68 and TIA-968A • Canada: Industry Canada CS-03 • European Union: TBR 4, TBR 12, and TBR 13 • Australia: AS/ACIF S038 and AS/ACIF S016 • Japan: JATE Gray Book • Hong Kong: HKTA 2027 and HKTA 2015 • Taiwan: IS6100 • Singapore: IDA TS ISDN PRA • Korea: MIC No.2004-15 |
| Telecommunication Interface Industry Standards |
• ITU-T G.703 • G.704 • G.706 • G.823 • ANSI T1.403 |
| Safety |
• United States: UL60950 • Canada: C22.2 No.60950 • Europe: EN60950 • Australia and New Zealand: AS/NZS3260 and TS001 • Other countries: IEC60950 |
| Network Equipment Building Standards (NEBS) |
• GR-63 • GR-78 • GR-1089-CORE Type 1/3 |
| EMC Emissions and Immunity |
47 CFR Part 15: • CISPR22: 2005 • EN300386: V1.3.3 : 2005 • EN55022: 1994 [+ amd 1 & 2] • EN55022: 1998 • EN61000-3-2: 2000 [Inc amd 1 & 2] • EN61000-3-3: 1995 [+ amd 1: 2001] • ICES-003 Issue 4 : 2004 • KN 22: 2005 • VCCI: V-3/2006.04 • CISPR24: 1997 [+ amd 1 & 2] • EN300386: V1.3.3 : 2005 • EN50082-1: 1997 • EN55024: 1998 [+ amd 1 & 2] • EN61000-6-1: 2001 |
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
