|
Product Details:
|
| Product Name: | Hot-Pluggable 1000BASE-T Copper SFP Transceiver | Data Rate: | 1.25 Gbps / 1000BASE-T |
|---|---|---|---|
| Connector Type: | RJ45 Copper Port | Transmission Distance: | Up To 100 M Over Cat5e/Cat6 |
| Application: | Campus LAN Uplink And Inter-switch Copper Access | Operating Temperature: | 0 C To 70 C |
| Power Consumption: | Less Than 1.05 W At 3.3 V | Compliance: | MSA, RoHS, CE, FCC |
| Highlight: | 1000BASE-T copper SFP transceiver,hot-pluggable RJ45 Campus LAN SFP,100m Cat6 RJ45 SFP module |
||
The SFP-1000BaseT-HW is a 1000BASE-T copper SFP transceiver that carries 1.25 Gbps full-duplex Gigabit Ethernet over ordinary Cat5e and Cat6 twisted-pair cabling. Packaged in the standard MSA SFP footprint with an RJ45 interface, this copper SFP transceiver plugs straight into the switch port you already own, so a copper-to-fiber conversion box or a new line card is never required.
Because the module is hot-pluggable, a technician can add or replace a copper SFP module in a live chassis without scheduling downtime. The mechanical latch is rated for repeated insertion cycles and keeps the RJ45 contact block aligned, which protects signal integrity during service work. Every unit is assembled on an automated SMT line, then 100% tested for bit-error rate, eye margin, power draw and temperature cycling before packing, so the copper SFP transceiver that arrives at your dock is production-ready rather than sample-grade.
Auto-negotiation is handled in hardware: the module presents 10/100/1000BASE-T to the host and settles link speed with the far end automatically, which removes manual duplex and speed settings from deployment scripts. Reaching 100m Cat6 makes the unit a practical 100m Cat6 copper SFP transceiver for in-building runs where pulling fiber is expensive or physically impossible, and the 100m Cat6 reach is measured with standard Cat6 patch cords at 1.25 Gbps line rate.
For campus LAN uplink duty the design keeps insertion loss low and returns a clean eye pattern over the full 100 m budget. That mix of live serviceability, Cat6 reach and predictable auto-negotiation is what makes this 1000BASE-T copper SFP transceiver a straightforward campus LAN uplink choice for access closets, floor distribution frames and temporary event networks.
| Parameter | Value |
|---|---|
| Part Number | SFP-1000BaseT-HW |
| Form Factor | SFP, MSA compliant |
| Data Rate | 1.25 Gbps / 1000BASE-T |
| Connector | RJ45 copper port |
| Cable Type | Cat5e / Cat6 twisted pair |
| Transmission Distance | Up to 100 m |
| Protocol Support | 10/100/1000BASE-T auto-negotiation |
| Supply Voltage | 3.3 V single supply |
| Power Consumption | < 1.05 W typical |
| Operating Temperature | 0 °C to 70 °C |
| Digital Diagnostics | Not supported (copper interface) |
| Compliance | MSA, RoHS, CE, FCC |
| Hot-Pluggable | Yes, live insertion and removal |
| Compatibility | Huawei switches, routers and media converters |
Contact Person: Mrs. Laura
Tel: +86 15921748445
Fax: 86-21-37890191