Juniper MPC7E MRATE Stackwise Optic Transceiver Module Sec Industrial Ethernet Router

Software release

* Junos OS Release 15.1F4 with Junos Continuity.

* Junos OS Release 15.1F6 and later.

* Junos OS release 16.1R1 and later.

Description

* Fixed-configuration MPC with 10-Gbps, 40-Gbps, and 100-Gbps port speeds

* Weight: 15.7 lb (7.12 kg)

* Model number: MPC7E-MRATE

* Name in the CLI: MPC7E-MRATE

Hardware features

* Line-rate throughput of up to 480 Gbps on MX240, MX480, and MX960 routers.

* Line-rate throughput of up to 400 Gbps on MX2000 routers with SFB, and up to 430 Gbps on MX2000 routers with SFB2.

* Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services

* Twelve Gigabit Ethernet ports that can be configured as 40-Gigabit Ethernet port or as four 10-Gigabit Ethernet ports using a
breakout cable. The ports support quad small-form factor pluggable plus (QSFP+) transceivers. The 40Gbps or 100Gbps ports
configured to run at 10Gbps speed are shown in the CLI as follows:
show interfaces terse Interface Admin Link Proto Local Remote xe-10/0/0:0 up down xe-10/0/0:1 up down xe-10/0/0:2 up down xe-10/0/0:3 up down

* Four out of the twelve ports can be configured as 100-Gigabit Ethernet ports. Port numbers 0/2, 0/5, 1/2 and 1/5 are the four
100-Gigabit Ethernet ports.

* You can configure different combination of port speeds as long as the aggregate capacity per group of six ports labeled 0/0
through 0/5 does not exceed 240 Gbps. Similarly, aggregate capacity per group of the other six ports labeled 1/0 through 1/5
should not exceed 240 Gbps.

* Requires high-capacity power supplies, high-capacity fan trays, and SCBE2 or SCBE3 switch control boards on MX240, MX480, and
MX960 routers.

* Requires an adapter card to be housed in MX2000 routers.

* The ports are labeled as (with the MPC orientation as shown in the above figure):
* 10-Gigabit Ethernet or 40-Gigabit Ethernet ports:
0/0, 0/1, 0/2 100G, 0/3, 0/4, 0/5 100G, 1/0, 1/1, 1/2 100G, 1/3, 1/4, and 1/5 100G

* 100-Gigabit Ethernet ports:
0/2 100G, 0/5 100G, 1/2 100G and 1/5 100G


NOTE: Only ports marked 100G support 100-Gigabit Ethernet speed using QSFP28 transceivers.




* Supports maximum transmission units (MTUs) from 256 bytes through 16,000 bytes for transit traffic, and from 256 bytes through
9,500 bytes for host bound packets.


NOTE: On MX960 routers, all the MPC slots can be occupied by MPC7E MRATE line cards at an ambient temperature of up to 40° C and
at any altitude. All the MPC slots can be occupied by an MPC7E MRATE line card at temperatures of up to 55° C and at sea level. At
an ambient temperature of above 55° C, and at an altitude above sea level, slot 11 cannot host MPC7E MRATE line cards.

Throughput

130 Mpps (wire speed)

Ports

48-port 10/100/1000BASE-T, 4 x 1/10GbE SFP/SFP+ (optics sold separately)

Dimensions (W x H x D)

17.4 x 1.75 x 10.2 in (44.19 x 4.45 x 25.9 cm)
1 rack unit

Whether to support redundant power supply

NO

Warranty

1 year

Transport

DHL

Place of delivery

China

Manufacturer

Juniper