|
Product Details:
|
| Brand: | HUAWEI | Model: | USG6585E-AC |
|---|---|---|---|
| Part Number: | 02353ADA | Fan Module: | FAN-023A-B |
| Memory: | DDR4 4 GB | Shipment: | DHL,UPS,TNT, |
| High Light: | cisco hardware firewall,cisco security appliance,cisco appliance firewall |
||
Huawei Firewall USG6525E-AC , USG6555E-AC , USG6565E-AC , USG6585E-AC
The USG6525E-AC, USG6555E-AC, USG6565E-AC, USG6585E-AC: 2*GE WAN+8*GE Combo+2*10GE SFP+,1 AC power
USG6515E-AC , USG6550E-AC , USG6560E-AC , USG6580E-AC Interface description
|
Name |
Description |
|---|---|
| RST button |
To restart the device, press the RST button. Ensure that the running configuration is saved before pressing the RST button. This button can enable you to restore the default settings with one click. To be specific, you can hold down the RST button for 5 seconds and then release it to restore the default settings and restart the device. |
|
0 to 7 (COMBO, RJ45 + SFP) |
Combo ports. Combo ports are logic ports. One combo port can work as a GE electrical interface or a GE optical port. Each combo port has only one internal forwarding port. When the electrical port is enabled, the optical port is disabled. When the optical port is enabled, the electrical port is disabled. The electrical and optical ports of a combo port use the same interface view, numbered from GigabitEthernet 0/0/0 to GigabitEthernet 0/0/7. By default, the combo port is used as an electical port. You can use the combo enable { copper | fiber } command to set the working mode of combo ports according to network requirements. Each optical port supports a 1 Gbit/s SFP Optical Module. |
| 0 to 1 (10G, SFP+) | 2 10GE autosensing Ethernet optical ports, numbered from XGigabitEthernet 0/0/0 to XGigabitEthernet 0/0/1. Supporting 1 Gbit/s eSFP Optical Modules and 10 Gbit/s SFP+ optical modules, and not compatible with GE optical modules. |
| 0 to 1 (WAN, RJ45) |
2 10/100/1000M autosensing Ethernet electrical ports, numbered from WAN 0/0/0 to WAN 0/0/1. The device is connected to the WAN or cloud management center using a network cable. |
| SSD card slot | The M.2 module is inserted to record logs and reports in real time. The M.2 module is optional. You can purchase the M.2 module as required. For details, see Storage Devices. |
| USB 3.0 port | USB ports allow you to insert USB 3.0 devices for system software upgrades. For details on upgrades through USB devices, refer to the Upgrade Guide delivered with the device. |
| USB 2.0 port | USB ports allow you to insert USB 2.0 devices for system software upgrades. For details on upgrades through USB devices, refer to the Upgrade Guide delivered with the device. |
| MGMT port |
Out-of-band 10/100/1000M RJ45 autosensing Ethernet management port. The interface number is METH 0/0/0 and the default IP address of the interface is 192.168.0.1. You can connect this port to the network port or any reachable port on a PC through a network cable. Then, you can use Telnet to access the CLI or use a web browser to access the web UI to configure, manage, and maintain the USG. |
| Console port (RJ45) |
Console ports allow you to locally connect a PC to the device. You can use a console cable to connect the console port (RJ45) on the device to the COM port on your PC and use a serial port terminal program on your PC to access, configure, and manage the device. |
Related products
USG6670-BDL-AC USG6716E USG6585E
USG6530E-AC USG6560E-AC USG6660-AC
USG6655E-AC USG6635E-AC USG6510E-POE
Shipment
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
