|
Product Details:
|
| Brand: | Huawei | Model: | S5731-H48T4XC |
|---|---|---|---|
| Ports: | 48 X 10/100/1000BASE-T Ports | Uplink Ports: | 4 X 10GE SFP+ Ports |
| Shipment: | DHL,UPS, TNT And By Air | Condition: | NIB With 1 Year Replacement Warranty |
| High Light: | huawei ethernet switches,huawei industrial switches |
||
Huawei Switch S5731-H48T4XC 48x10/100/1000BASE-T Ports, 4x10GE SFP+ Ports, 1*Expansion slot
S5731-H48T4XC Overview
Huawei S5731-H48T4XC (48*10/100/1000BASE-T ports, 4*10GE SFP+ ports, 1*expansion slot, without power module
S5731-H48T4XC Specification
|
Item |
Description |
|---|---|
| Memory (RAM) | 4 GB |
| Flash | 1 GB in total. To view the available flash memory size, run the display version command. |
| Mean time between failures (MTBF) | 55.31 years |
| Mean time to repair (MTTR) | 2 hours |
| Availability | > 0.99999 |
| Service port surge protection | Common mode: ±6 kV |
| Power supply surge protection |
|
| Dimensions (H x W x D) |
|
| Weight (with packaging) | 8.55 kg (18.85 lb) |
| Stack ports | 10GE SFP+ ports on the front panel, or 10GE SFP+ ports or 40GE QSFP+ ports on the rear card |
| RTC | Supported |
| RPS | Not supported |
| PoE | Not supported |
| Rated voltage range |
|
| Maximum voltage range |
|
| Maximum power consumption (100% throughput, full speed of fans) | 124 W (without card) |
| Typical power consumption (30% of traffic load, tested according to ATIS standard) | 101 (without card) |
| Storage temperature | -40°C to +70°C (-40°F to +158°F) |
| Noise under normal temperature (27°C, sound power) | < 57.5 dB(A) |
| Relative humidity | 5% to 95%, noncondensing |
| Operating altitude | 0-5000 m (0-16404 ft.) |
| Certification |
|
| Part number | 02352QPT |
S5731-H48T4XC appearance
| 1 | Forty-eight 10/100/1000BASE-T ports | 2 |
Four 10GE SFP+ ports Applicable modules and cables:
|
| 3 | One console port | 4 | One ETH management port |
| 5 | One USB port | 6 |
One PNP button NOTICE:
To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. |
| 7 |
Ground screw NOTE:
|
8 |
Rear card slot NOTE:
Applicable card:
|
| 9 |
Fan module slot 1 NOTE:
Applicable fan module: FAN-023A-B Fan Module |
10 |
Fan module slot 2 NOTE:
Applicable fan module: FAN-023A-B Fan Module |
| 11 |
Power module slot 1 NOTE:
|
12 |
Power module slot 2 NOTE:
|
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
