|
Product Details:
|
| Product Name: | 48-Port Class 4 PoE Access Switch | Application: | Enterprise Branch, SMB And IoT Access Networks |
|---|---|---|---|
| Port Configuration: | 48 X 10/100/1000BASE-T Class 4 PoE | PoE Power Budget: | 370 W |
| Uplink Ports: | 4 X 10G SFP+ (1G SFP Compatible) | Switching Capacity: | 176 Gbps |
| Forwarding Throughput: | 130.9 Mpps | Operating Layer: | Layer 2 With Static Routing, IPv6, ACLs, QoS |
| Management: | Aruba Central, NetEdit, REST API, CLI, SNMP | Model Number: | JL675A |
| Highlight: | 48 port PoE access switch,370W Class 4 PoE budget,10G SFP+ uplink switch |
||
The Aruba CX 6100 48G Class 4 PoE access switch (JL675A) is a 1U Layer 2 access platform engineered for enterprise branch offices, mid-market campuses and growing SMB networks that need dependable wired connectivity for both users and IoT endpoints. Forty-eight 10/100/1000BASE-T ports deliver Class 4 PoE, while a 370W PoE budget allows one switch to energise wireless access points, IP cameras, access control readers and desk phones without additional injectors or midspan hardware.
Four built-in 10G SFP+ uplinks remove the bottleneck between the access layer and the aggregation or core layer, so dense PoE deployments still reach the network with headroom for future growth. The unit runs the AOS-CX operating system shared across the Aruba CX portfolio, giving administrators a consistent CLI, REST API and cloud management experience, and it ships without software licensing requirements, keeping total cost of ownership predictable as the access stack expands.
Because the 48-port Class 4 PoE access switch is built on the Aruba ASIC architecture, forwarding stays deterministic under mixed unicast, multicast and broadcast load. ACLs, IPv6 and robust QoS are available out of the box, and the 4 x 10G SFP+ uplink switch design keeps fibre or DAC paths ready for the next bandwidth refresh instead of forcing a chassis replacement.
| Parameter | Value |
|---|---|
| Model | JL675A (Aruba CX 6100 48G Class 4 PoE 4SFP+ 370W) |
| Port Configuration | 48 x 10/100/1000BASE-T, Class 4 PoE |
| Uplink Ports | 4 x 10G SFP+ (backward compatible with 1G SFP) |
| PoE Power Budget | 370 W |
| Switching Capacity | 176 Gbps |
| Forwarding Throughput | 130.9 Mpps |
| Latency | 1.5 microseconds |
| Operating Layer | Layer 2 with static routing, IPv6, ACLs, QoS |
| Stacking | VSF, up to 4 members |
| Management | Aruba Central, NetEdit, REST API, CLI, SNMP |
| Power Supply | Internal, 100-240 VAC |
| Form Factor | 1U rack mountable |
| Dimensions (H x W x D) | 4.4 x 44.2 x 25.7 cm |
| Operating Temperature | 0 to 45 degrees Celsius |
Budget planning depends on device draw. At a typical 12.95 W Class 3 access point, roughly 28 units fit within 370W; at 25.5 W Class 4, about 14 units. Always reserve 10-15 percent headroom for inrush and future additions.
No. The 10G SFP+ uplink switch design also accepts 1G SFP transceivers and DAC cables, so existing fibre plant can be reused while the path stays ready for 10G upgrades.
No licence is needed. Layer 2 switching, ACLs, QoS, IPv6 and static routing are available on the base system, and management through Aruba Central is optional.
Yes. Local CLI, SNMP and the REST API provide full on-premises control; Aruba Central and NetEdit add cloud visibility and automation when required.
For branch and SMB access layers, static routing covers inter-VLAN traffic and default gateway needs without the cost of a routing licence, while the 10G uplinks hand off to a core switch for larger topologies.
A single 1U slot (4.4 x 44.2 x 25.7 cm) with 100-240 VAC internal power and an operating range of 0 to 45 degrees Celsius, which suits standard telecom closets and edge cabinets.
Contact Person: Mrs. Laura
Tel: +86 15921748445
Fax: 86-21-37890191