Wi-Fi 7 Tri-Band 320MHz Wireless Access Point with 5 Gigabit PoE Uplink and 2x2 MU-MIMO Indoor Access Point

This indoor wireless access point brings Wi-Fi 7 (802.11be) to campus and branch floors with three separate radios running 2.4 GHz, 5 GHz and 6 GHz simultaneously, two spatial streams each. Channel width reaches 320 MHz on the 6 GHz radio and 160 MHz on 5 GHz, which is where the headline rates come from: 688 Mbps on 2.4 GHz, 2.882 Gbps on 5 GHz and 5.765 Gbps on 6 GHz. A single 100M/1G/2.5G/5G Multigigabit RJ45 port feeds both data and 802.3at PoE power, so the 320 MHz access point is deployed with one cable and no local PSU. The third radio keeps scanning all bands around the clock for rogue devices and interference while clients stay associated, and the integrated BLE/ZigBee plus GPS radios support iBeacon advertising and location services. Management runs through the WLAN controller built into any FortiGate appliance, through FortiEdge Cloud, or as a FortiSASE-managed endpoint.

• Enterprise campus: tri-radio design spreads clients across 2.4, 5 and 6 GHz to cut airtime congestion in lecture halls, open offices and auditoriums.
• Branch and SD-branch: zero-touch provisioning from FortiGate or FortiEdge Cloud lets non-technical staff at remote sites bring the access point online without a truck roll.
• Micro-branch and SASE edge: the AP can act as a SASE endpoint, giving micro sites zero-trust access without extra appliances.
• SMB with limited IT: built-in NAC and firewall, IPS, application control and web filtering protect the wireless LAN from one console.
• Location services: BLE/ZigBee and GPS radios drive iBeacon advertising, asset tracking and floor-level positioning independently of the Wi-Fi radios.

• Real 6 GHz headroom: 320 MHz channels and 4096 QAM on the 6 GHz radio deliver 5.765 Gbps of PHY rate for Wi-Fi 7 clients.
• Always-on monitoring: a dedicated scan radio performs WIDS/WIPS and spectrum analysis 24/7 while clients keep full three-band service.
• Single-cable installation: 802.3at PoE over the 5 Gigabit port removes local power and keeps the wired uplink from becoming the bottleneck.
• Compact and light: 175 mm footprint and 1.01 kg mass simplify ceiling and T-rail mounting in retrofit projects.
• Serviceable design: hit-less PoE failover and built-in surge protection guard against power events on long cable runs.
• Long service life: MTBF above 10 years and a limited lifetime warranty reduce replacement planning risk.