|
Product Details:
|
| Brand: | HUAWEI | PN: | S2710-52P-SI-AC |
|---|---|---|---|
| Ports: | 48 × 10/100 + 4 × Gigabit SFP | Interfaces: | RI-45 |
| Capacity: | 32 Gbit/s | Power Supply: | AC 110/220V |
| High Light: | gigabit network switch,huawei ethernet switches |
||
S2710-52P-SI-AC Huawei S2700 Series Switch 48 x 10/100 ports,4 Gig SFP,AC 110/220V
The S2700 is provided in the standard version (SI) and enhanced version (EI). The S2700 switches of the EI series are collectively called S2700-EI, and the S2700 switches of the SI series are collectively called S2700-SI. S2710-SI is a sub-series switch of S2700-SI. Huawei S2710-52P-SI-AC switch provides 48 Ethernet 10/100 ports and 4 Gig SFP.
S2710-52P-SI-AC Specification |
|
| Downlink ports | 48 × 10/100Base-TX Ethernet ports |
| Uplink ports | 4 × Gigabit SFP |
| MAC address |
8K MAC address entries Manual deletion of dynamic MAC address entries Aging time of MAC address configurable Blackhole MAC address entries |
| VLAN feature |
4K VLANs, complying with IEEE 802.1Q Port-based VLAN assignment |
| N/A | |
| QoS |
Outbound-Port-based rate limiting and flow-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP+WRR algorithms |
| N/A | |
| IPv6 feature | IPv6 protocol Static IPv6 routes |
| Multicast | IGMP v1/v2/v3 snooping Port-based rate limiting for multicast packets |
| Reliability | STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s) |
| Traffic sampling | N/A |
| Security & access features | Storm suppression , IP Source Guard |
| Multiple authentication methods including AAA, RADIUS, and TACACS+; Port isolation; Suppression of multicast, broadcast, and unknown unicast packets; CPU defense; DHCP snooping |
|
| Surge protection | Surge protection capability of service ports: 6 kV (The surge protection capability of service ports on PoE switches is 1 kV.) |
| Management | Stack Auto-Config CLI-based configuration Remote configuration using Telnet SNMP V1/V2/V3 Remote network monitoring SSHv2 Web-based device management |
| Operating environment | Long-term operating temperature: –5°C to + 50°C Relative humidity: 10% to 90% (non-condensing) |
| Power | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage: 90 to 264 V AC, 50/60 Hz |
| Dimensions (W x D x H) | 442 × 220 × 43.6 mm |
| Weight | S2710-52P-SI<3 kg |
| Power consumption | S2710-52P-SI<38 W |
Table shows the recommended optical transceivers.
| Model | Description |
| FE-SFP Optical Transceiver | |
| SFP-FE-SX-MM1310 | Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC) |
| eSFP-FE-LX-SM1310 | Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC) |
| S-SFP-FE-LH40-SM1310 | Optical Transceiver, eSFP, FE, Single-mode Module(1310nm,40km,LC) |
| GE-SFP Optical Transceiver | |
| eSFP-GE-SX-MM850 | Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
| SFP-GE-LX-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
| S-SFP-GE-LH40-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
| S-SFP-GE-LH40-SM1550 | Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
Related products
S5700-28P-LI-AC S5700-26X-SI-12S-AC S5700-10P-PWR-LI-AC
S5700-10P-LI-AC S5700-28C-EI-AC S5700-48TP-PWR-SI-AC
S6700-24-EI S6700-48-EI S6720-32C-SI-AC
S6720-16X-LI-16S-AC S6720-26Q-SI-24S-AC S6720S-16X-LI-16S-AC
Shipping
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
