|
Product Details:
|
| Product Type:: | Huawei Network Switch | Model: | S5720-52X-PWR-SI |
|---|---|---|---|
| Ports: | 48 X 10/100/1000 PoE+ Ports | PoE: | 4 × 10 Gig SFP+ |
| Primary Port Speed: | 1150W AC Power Suppl | WLAN: | New With 1 Year |
| Highlight: | gigabit network switch,huawei industrial switches |
||
The Huawei S5720-52X-PWR-SI is a model from Huawei's S5720 series of Ethernet switches, designed for enterprise networks. Here are the key features and specifications:
Ports:
Power over Ethernet (PoE):
Layer 2 and Layer 3 Support:
Management and Security:
Performance:
Form Factor:
Environmental Features:
Enterprise Networks: Ideal for connecting end-user devices in office environments or as a core switch in a larger network architecture.
Campus Networks: Suitable for use in educational institutions or corporate campuses needing reliable and scalable networking solutions.
The S5720-SI was developed based on high-performing hardware and the Huawei Versatile Routing Platform (VRP). The S5720-SI supports simplified Operations and Maintenance (O&M), intelligent stack (iStack), flexible Ethernet networking, and MACsec. It also provides enhanced Layer 3 features and sophisticated IPv6 features. The S5720-SI can be used in various scenarios. For example, it can be used as an access or aggregation switch on a campus network or as an access switch in a data center.
| Product Code | S5720-52X-PWR-SI-ACF |
| Downlink Ports | 48 x Ethernet 10/100/1,000 PoE+ ports |
| Uplink Interfaces | 4 × 10 Gig SFP+ |
| Forwarding Performance | 132 Mpps |
| Switching Capacity | 336 Gbit/s |
| Power Supply | 1150W AC power suppl |
| Stack | Supported |
| Stack Ports | GE electrical ports and 10GE SFP+ optical ports on the front panel |
| Memory (RAM) | 512 MB |
| Flash | 240 MB |
| Dimensions (W x D x H) |
44.2 cm x 42 cm x 4.44 cm When 1150 W power modules are installed, they stretch out from the chassis. Therefore, the total depth of the switch changes to 50.73 cm. |
![]()
| ① | Forty-eight PoE+ 10/100/1000BASE-T ports | ④ | One console port |
| ② | Four 10GE SFP+ ports | ⑤ | One USB port |
| ③ | ETH management port |
Recommended transceivers and power supply
| Model | Description | |
| GE-SFP Optical Transceiver | ||
| SFP-1000BaseT | Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45) | |
| eSFP-GE-SX-MM850 | Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) | |
| SFP-GE-LX-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) | |
| S-SFP-GE-LH40-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) | |
| S-SFP-GE-LH40-SM1550 | Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) | |
| 10GE SFP+ optical transceiver | ||
| SFP-10G-USR | 10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC) | |
| OMXD30000 | Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC) | |
| OSX010000 | Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC) | |
| Power Module | ||
| W2PSA1150 | Huawei 1150W AC Power Module | |
S5720-52X-PWR-SI-ACF Specification |
|
| Fixed Port |
48 x Ethernet 10/100/1,000 PoE+ ports 4 × 10 Gig SFP+ |
| MAC address table | IEEE 802.1d compliance |
| MAC address learning and aging | |
| Static, dynamic, and blackhole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| MAC address entries: S5700-SI series - 16K | |
| VLAN | 4K VLANs |
| Guest VLAN and voice VLAN | |
| GVRP | |
| MUX VLAN | |
| VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
| 1:1 and N:1 VLAN Mapping | |
| SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series) | |
| Ring protection | RRPP ring topology and RRPP multi-instance |
| Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
| SEP | |
| ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series) | |
| STP, RSTP, and MSTP | |
| BPDU protection, root protection, and loop protection | |
| BPDU Tunnel | |
| Reliability | Ethernet OAM (IEEE 802.3ah and 802.1ag) |
| ITU-Y.1731 | |
| DLDP | |
| LACP | |
| E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series) | |
| BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series) | |
| MPLS features | MPLS L3VPN |
| MPLS L2VPN(VPWS/VPLS) | |
| MPLS-TE | |
| MPLS QoS | |
| Notes: supported by S5710-EI, S5700-HI and S5710-HI | |
| IP routing | Static routing |
| RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series) | |
| OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series) | |
| IPv6 features | Neighbor Discovery (ND) |
| Path MTU (PMTU) | |
| IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
| ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
| MLD v1/v2 snooping | |
| 6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series) | |
| Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave |
| Multicast forwarding in a VLAN and multicast replication between VLANs | |
| Multicast load balancing among member ports of a trunk | |
| Controllable multicast | |
| Port-based multicast traffic statistics | |
| IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series) | |
| QoS/ACL | Rate limiting on packets sent and received by an interface |
| Packet redirection | |
| Port-based traffic policing and two-rate three-color CAR | |
| Eight queues on each port | |
| WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
| WRED (supported by the S5710-EI and S5700-HI) | |
| Re-marking of the 802.1p priority and DSCP priority | |
|
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
| Rate limiting in each queue and traffic shaping on ports | |
| Security | User privilege management and password protection |
| DoS attack defense, ARP attack defense, and ICMP attack defense | |
| Binding of the IP address, MAC address, interface, and VLAN | |
| Port isolation, port security, and sticky MAC | |
| MFF | |
| Blackhole MAC address entries | |
| Limit on the number of learned MAC addresses | |
| 802.1x authentication and limit on the number of users on an interface | |
| AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC | |
| SSH v2.0 | |
| Hypertext Transfer Protocol Secure (HTTPS) | |
| CPU defense | |
| Blacklist and whitelist | |
| Access Security | DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
| Management and maintenance | Virtual cable test |
| Port mirroring and RSPAN (remote port mirroring) | |
| Remote configuration and maintenance using Telnet | |
| SNMP v1/v2c/v3 | |
| RMON | |
| Web NMS | |
| HGMP | |
| System logs and alarms of different levels | |
| 802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI) | |
| Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches) | |
| NetStream (supported by the S5710-EI, S5700-HI and S5710-HI) | |
| sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series) | |
| Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
| Supports LNP (Similar to DTP) | |
| Supports VCMP (Similar to VTP) | |
| Operating environment | Operating temperature: 0℃–50℃ |
| Relative humidity: 10%–90% (non-condensing) | |
| Input voltage |
AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz |
![]()
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191