Huawei AP3010DN-V2 Dual-Band Wireless Ceiling Access Point AP3010DN-V2 Indoor Access Points

Item

Description

Interface type

1 x 10/100/1000M port that connects to the wired Ethernet and supports PoE input.

LED indicator

Indicates the power-on, startup, running, alarm, and fault status of the system.

Antenna type

Built-in dual-band omnidirectional antennas

Antenna gain

2.4G: 4 dBi
5G: 6 dBi

Maximum number of VAPs for each radio

16

Maximum number of users

Fit AP: ≤ 128
Fat AP: ≤ 64

Maximum transmit power

2.4G: 23 dBm (combined power)
5G: 23 dBm (combined power)
NOTE
The actual transmit power depends on local laws and regulations.

Maximum number of non-overlapping channels

2.4 GHz (2.412 GHz to 2.472 GHz)
* 802.11b/g * 20 MHz: 3


* 802.11n * 20 MHz: 3
* 40 MHz: 1



5 GHz (5.18 GHz to 5.825 GHz)
* 802.11a * 20 MHz: 13


* 802.11n * 20 MHz: 13
* 40 MHz: 6


* 802.11ac * 20 MHz: 13
* 40 MHz: 6
* 80 MHz: 3



NOTE
The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels
varies in different countries. For details, see the Country Codes & Channels Compliance.

Channel rate supported

802.11b: 1, 2, 5.5, and 11 Mbit/s
802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
802.11n: 6.5 to 300 Mbit/s
802.11ac: 6.5 to 867 Mbit/s

System memory

256 MB DDR2
32 MB flash

Power input

DC: 12 V ± 10%
PoE power supply: in compliance with IEEE 802.3af/at

Maximum power consumption

10.2 W
NOTE
The actual maximum power consumption depends on local laws and regulations.

Operating temperature and altitude

-60 m to +1800 m: -10°C to +50°C
1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m.

Storage temperature

–40°C to +70°C

Operating humidity

5% to 95% (non-condensing)

IP rating

IP41

Atmospheric pressure

70 kPa to 106 kPa

Weight

0.4 kg

Dimensions (H x W x D)

39.5 mm x 180 mm x 180 mm