|
Product Details:
|
| Condition: | NIB And Used | Branch: | Huawei |
|---|---|---|---|
| Product Line: | Networking | Sub Product Family: | FTTx And Cable |
| Product Series: | MA5608T | UOM: | PCS |
| Highlight: | gigabit network switch,huawei industrial switches |
||
The H801MPWE board is a power board with single DC power inputs. The H801MPWE board leads in the -48 V or -60 V DC power to the device.
The H801MPWE board supports the following functions:
One -48 V or -60 V DC power inputs (input voltage range: -38.4 V to -72 V)
Filtering and current-limiting for the power input port
Detection of power supply availability, and power supply faults
Reporting of the protection alarm
Indication of power status
Backup for the other board
Item | MA5600T (ETSI) | MA5600T (IEC) | MA5603T | MA5608T |
|---|---|---|---|---|
| Appearance | See product photo | |||
| Supported cabinet | Indoor cabinet: N63E-22, N66E-18 | Indoor cabinet: N66E-22 | Indoor cabinet: N66E-18 | Indoor cabinet: N63E-22 |
| Board configuration | 2 slots for control boards | 2 slots for control boards | 2 slots for control boards | 2 slots for control boards |
| Supported control board and its switching capacity | SCUB: 48 Gbit/s | MCUD/MCUD1/MCUE: 128 Gbit/s in active/standby mode or 256 Gbit/s in load-sharing mode | ||
| System Layer 2 packet forwarding rate | SCUB: 72 Mpps | MCUD/MCUD1/MCUE: 190 Mpps in active/standby mode or 380 Mpps in load-sharing mode | ||
| Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. | |||
| BER in full load | BER of a port when the port transmits data in full load < 10 e-7 | |||
| System reliability specifications | System: redundant configuration. NOTE: Due to different network environments and different boards used by devices, the preceding MTBF (45 years) of the MA5600T/MA5603T/MA5608T is only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference. For details, contact the related Huawei engineers. | |||
| Maximum number of ADSL2+ ports in a subrack | 1024 | 896 | 384 | 128 |
| Maximum number of VDSL2 ports in a subrack | 1024 | 896 | 384 | 128 |
| Maximum number of Vectoring ports in a subrack | 768 | 768 | 384 | N/A |
| Maximum number of SuperVector ports in a subrack | N/A | N/A | 384 | N/A |
| Maximum number of EFM SHDSL ports in a subrack | 512 | 448 | 192 | 64 |
| Maximum number of TDM SHDSL ports in a subrack | 256 | 224 | 96 | 32 |
| Maximum number of POTS ports in a subrack | 1024 | 896 | 384 | 128 |
| Maximum number of ISDN BRA ports in a subrack | 512 | 448 | 192 | 64 |
| Maximum number of ISDN PRA ports in a subrack | 64 | 64 | 64 | 64 |
| Maximum number of GPON ports in a subrack | 256 | 224 | 96 | 32 |
| Maximum number of 10G GPON ports in a subrack | 128 | 112 | 48 | 16 |
| Maximum number of P2P FE ports in a subrack | 768 | 672 | 288 | 96 |
| Maximum number of P2P GE ports in a subrack | 768 | 672 | 288 | 96 |
| Maximum number of upstream ports (GE ports in the GIU slot) in a subrack | 8 | 8 | 8 | N/A |
| Maximum number of upstream ports (10GE ports in the GIU slot) in a subrack | 4 | 4 | 4 | N/A |
| Maximum number of upstream ports (PON ports in the GIU slot) in a subrack | 1 | 1 | 1 | N/A |
| Maximum number of upstream ports (ports on the control board) in a subrack | SCUB/SCUF: 4 x GE (in the active/standby mode) | MCUD/MCUE: 8 x GE (in the load-sharing mode) | ||
| Maximum number of extended subracks connected to a master subrack | 32 | 32 | 32 | N/A |
| Maximum number of ONUs supported by each subrack |
| |||
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
