|
Product Details:
|
| Brand: | HUAWEI | PN: | ET1BS12712S0 |
|---|---|---|---|
| Service Slots: | 12 | MPU Slots: | 2 |
| SFU Slots: | 4 | Redundancy Design: | MPUs, SFUs, Power Supplies, And Fan Modules |
| High Light: | huawei ethernet switches,huawei industrial switches |
||
Huawei S12712 Assembly Chassis 12 Slots ET1BS12712S0 S12700 Series Switch Chassis
ET1BS12712S0 is the Huawei S12712 Switch assembly chassis, including 12 slots.
ET1BS12712S0 Specification |
|
| Switching Capacity | 17.44 Tbit/s; 44.96 Tbit/s |
| Packet Forwarding Rates | 9,120 Mpps; 12,960 Mpps |
| MPU Slots | 2 |
| SFU Slots | 4 |
| Service Card Slots | 12 |
| Redundancy Design | MPUs, SFUs, power supplies, and fan modules |
| CSS2 | 1+N backup of MPUs in a cluster |
| Up to 1.92 Tbit/s cluster bandwidth, 4 μs inter-chassis transmission latency | |
| Wireless Network Management | Native AC |
| AP access control, AP region management, and AP profile management | |
| Radio profile management, uniform static configuration, and centralized dynamic management | |
| Basic WLAN services, QoS, security, and user management | |
| User Management | Unified user management |
| 802.1x, MAC, and Portal authentication | |
| Traffic- and time-based accounting | |
| User authorization based on user groups, domains, and time ranges | |
| iPCA Quality Awareness | Marking real service packets to obtain real-time count of dropped packets and packet loss ratio |
| Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks | |
| SVF2.0 Virtualization | Up to 4K clients (access switches and APs) virtualized into a single device |
| Two layers of ASs allowed in an SVF system | |
| Third-party devices allowed between SVF parent and clients | |
| VLAN | Access, trunk, and hybrid interface types, auto-negotiation of LNP links |
| Default VLAN | |
| VLAN switching | |
| QinQ and selective QinQ | |
| MAC address-based VLAN assignment | |
| ARP | 256K ARP entries |
| MAC Address | 1M MAC address entries |
| Dynamic MAC address learning and aging | |
| Static, dynamic, and blackhole MAC address entries | |
| Source MAC address filtering | |
| MAC address limiting based on ports and VLANs | |
| Ring Network Protection | Spanning Tree Protocol (STP) (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
| SEP | |
| Bridge Protocol Data Unit (BPDU), root protection, and loop protection | |
| BPDU tunnel | |
| G.8032 Ethernet Ring Protection Switching (ERPS) | |
| IP Routing | 3M IPv4 routing entries |
| 512K IPv6 routing entries | |
| IPv4 dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP | |
| IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ | |
| Multicast | 128,000 multicast routing entries |
| IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping | |
| PIM-DM, PIM-SM, and PIM-SSM | |
| Multicast Source Discovery Protocol (MSDP) and Multiprotocol Extensions for BGP (MBGP) | |
| Fast leave | |
| Multicast traffic control | |
| Multicast querier | |
| Multicast protocol packet suppression | |
| Multicast Call Admission Control (CAC) | |
| Multicast ACL | |
| MPLS | Basic MPLS functions |
| MPLS Operations, Administration, and Maintenance (OAM) | |
| MPLS Traffic Engineering (TE) | |
| MPLS VPN/VLL/VPLS | |
| Reliability | Link Aggregation Control Protocol (LACP) and E-Trunk |
| Virtual Router Redundancy Protocol (VRRP) and Bi-directional Forwarding Detection (BFD) for VRRP | |
| BFD for BGP/IS-IS/OSPF/static route | |
| Non-Stop Routing (NSR), Non-Stop Forwarding (NSF) and Graceful Restart (GR) for BGP/IS-IS/OSPF/LDP | |
| TE Fast ReRoute (FRR) and IP FRR | |
| Eth-OAM 802.3ah and 802.1ag (hardware-based) | |
| HSR | |
| ITU-Y.1731 | |
| Device Link Detection Protocol (DLDP) | |
| QoS | 256K ACLs |
| Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority | |
| ACLs and actions such as Committed Access Rate (CAR), re-marking, and scheduling | |
| Queuing algorithms, such as SP, WRR, DRR, SP + WRR, and SP + DRR | |
| Congestion avoidance mechanisms, including (WRED) and tail drop | |
| H-QoS | |
| Traffic shaping | |
| Network Synchronization | Ethernet synchronization |
| 1588v2 | |
| Configuration and Maintenance | Terminal access services such as console port login, Telnet, and SSH |
| Network management protocols, such as SNMP v1/v2/v3 | |
| File uploading and downloading through FTP and TFTP | |
| BootROM upgrade and remote in-service upgrade | |
| Hot patches | |
| User operation logs | |
| Security and Management | MAC address, Portal, 802.1x, and Dynamic Host Configuration Protocol (DHCP) snooping triggered authentication |
| MACsec | |
| RADIUS and HWTACACS authentication for login users | |
| Command line authority control based on user levels, preventing unauthorized users from using command configurations | |
| Defense against DoS attacks, Transmission Control Protocol (TCP) SYN Flood attacks, User Datagram Protocol (UDP) Flood attacks, broadcast storms, and heavy traffic attacks | |
| Remote Network Monitoring (RMON) | |
| Security Protection* | Firewall |
| Network Address Translation (NAT) | |
| IPSec, SSL VPN | |
| Intrusion Protection System (IPS) | |
| Load balancing Analog Digital Conversion (ADC) | |
| Interoperability | Interoperable with VBST (compatible with PVST/PVST+/RPVST) |
| Interoperable with LNP (similar to DTP) | |
| Interoperable with VCMP (similar to VTP) | |
| Energy Saving | Energy Efficient Ethernet (802.3az) |
| Dimensions (H x W x D) | 841.75 mm x 442 mm x 489 mm, 19U |
| Weight (empty chassis) | 63 kg |
| Operating Voltage | DC: –40V to –72V AC: 90V to 290V |
| Maximum Power Consumption of the Entire Equipment | ≤ 6,600W |
Related products
S5700-28P-LI-AC S5700-26X-SI-12S-AC S5700-10P-PWR-LI-AC
S5700-10P-LI-AC S5700-28C-EI-AC S5700-48TP-PWR-SI-AC
S6700-24-EI S6700-48-EI S6720-32C-SI-AC
S6720-16X-LI-16S-AC S6720-26Q-SI-24S-AC S6720S-16X-LI-16S-AC
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
