|
Product Details:
|
| Condition: | NIB And Used | Branch: | Huawei |
|---|---|---|---|
| Dimensions: | 442 Mm × 310 Mm × 43.6 Mm | Switch Capacity: | 64 Gbit/s |
| Downlink Ports: | 24 × Ethernet 10/100 PoE+ Ports | Uplink Ports: | 2 Gig SFP And 2 Dual-purpose 10/100/1000 Or SFP |
| High Light: | huawei ethernet switches,huawei industrial switches |
||
S2700 series enterprise switches are next-generation, energy-saving intelligent 100M Ethernet switches developed by Huawei. The S2700 uses cutting-edge switching technology and Huawei’s Versatile Routing Platform (VRP) software to meet the demand for multi-service provisioning and access on Ethernet networks. They are easy to install and maintain. With its flexible network deployment, comprehensive security, Quality of Service (QoS) policies, and energy-saving technology, the S2700 helps enterprise customers build next-generation IT networks.
The S2700 is a box device that is 1U 1.75 in. (44.45 mm) high. It is available in a standard version (SI) or an enhanced version (EI).
|
S2750-28TP-PWR-EI-AC Specification |
|
|
Downlink ports |
24 × 10/100Base-TX Ethernet ports |
|
Uplink ports |
2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP |
|
MAC address |
16K MAC address entries |
|
Manual deletion of dynamic MAC address entries |
|
|
Aging time of MAC address configurable |
|
|
MAC address learning control which based on ports |
|
|
Blackhole MAC address entries |
|
|
VLAN feature |
4K VLANs, complying with IEEE 802.1Q |
|
Port-based VLAN assignment |
|
|
MAC address-based assignment |
|
|
Port-based QinQ |
|
|
QoS |
Port-based rate limiting and flow-based rate limiting |
|
8 queues of different priorities on each port |
|
|
Mapping between 802.1p priorities and queues |
|
|
SP, WRR, and SP+WRR algorithms |
|
|
packet-based priority remark and packet redirection |
|
|
IPv6 feature |
IPv6 protocol |
|
Static IPv6 routes |
|
|
Supports MLD v1/v2 snooping. |
|
|
Multicast |
MVLAN |
|
Controllable multicast |
|
|
IGMP v1/v2/v3 snooping |
|
|
Port-based rate limiting for multicast packets |
|
|
Reliability |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP topology and RRPP multi-instance |
|
SEP and ERPS (G.8032) |
|
|
Smart Link tree topology and Smart Link multi-instance, implementing millisecond-level protective switchover |
|
|
Traffic sampling |
sFlow |
|
Security & access features |
802.1x authentication and limit on the number of users on an interface |
|
Storm suppression |
|
|
IP Source Guard |
|
|
Multiple authentication methods including AAA authentication, RADIUS authentication, and TACACS+ authentication |
|
|
802.1x authentication, MAC address authentication, MAC bypass authentication |
|
|
DHCP snooping |
|
|
Port isolation and sticky MAC |
|
|
Packet filtering based on MAC addresses |
|
|
Suppression of multicast, broadcast, and unknown unicast packets |
|
|
Limit on the number of learned MAC addresses |
|
|
CPU defense |
|
|
S2750-EI/S2751-EI:DHCP relay |
|
|
Surge protection |
Surge protection capability of service ports: 6 kV |
|
Management |
Stack |
|
Easy Operation |
|
|
CLI-based configuration |
|
|
Remote configuration using Telnet |
|
|
SNMP V1/V2/V3 |
|
|
Remote network monitoring |
|
|
SSHv2 |
|
|
Web-based device management |
|
|
Operating environment |
Long-term operating temperature: –5°C to + 50°C |
|
Relative humidity: 10% to 90% (non-condensing) |
|
|
Power |
AC: |
|
Rated voltage range: 100 V to 240 V AC, 50/60 Hz |
|
|
Maximum voltage: 90 to 264 V AC, 50/60 Hz |
|
|
Dimensions (W x D x H) |
442 × 310 × 43.6 mm |
|
Weight |
S2750-28TP-PWR-EI < 4.5 kg |
|
Power consumption |
S2750-28TP-PWR-EI < 445 W |
|
(PoE < 370W) |
|
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
