|
Product Details:
|
| Condition: | NIB And Used | Branch: | Huawei |
|---|---|---|---|
| Dimensions: | 442×420×44.4 | Type: | Network Switch |
| With Subcard: | 209W | Without Subcard: | 190W |
| High Light: | gigabit network switch,huawei ethernet switches |
||
Huawei S6720-54C-EI-48S-AC switch is one of the Huawei S6720 series Switches. The S6720 series offers high-availability, scalable 10 Gbit/s server access for Internet Data Centers (IDCs) and large traditional data centers. It also provides optional configuration of 4 x 40 GE QSFP+ interface card gives the S6720-EI Series Switches unusual flexibility: use to provide access to high-bandwidth server-based applications, or as a core or aggregation switch in enterprise campus networks.
| S6720-54C-EI-48S-AC Specifications | |
| Fixed Ports | 48 × 10 GE SFP+, 2 x 40 GE QSFP+ ports |
| Extended Slot | One extended slot for 4 x 40 GE QSFP+ interface card |
| MAC Address Table | 288K MAC address entries |
| MAC address learning and aging | |
| Static, dynamic, and black hole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| VLAN | 4K VLANs |
| Guest VLAN and voice VLAN | |
| VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
| 1:1 and N:1 VLAN Mapping | |
| QinQ and selective QinQ | |
| IPv4 Routing | Static routing, RIPv1, RIPv2, ECMP, and URPF |
| OSPF, IS-IS, and BGP | |
| VRRP | |
| Policy-based routing | |
| Routing policy | |
| IPv6 Routing | Static route |
| RIPng | |
| OSPFv3 | |
| BGP4+ | |
| ISISv6 | |
| IPv6 Features | Neighbor Discovery (ND) |
| PMTU | |
| IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
| 6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
| ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
| MLD v1/v2 snooping | |
| Multicast | Static Layer 2 multicast MAC address |
| MAC-based multicast forwarding | |
| IGMP snooping and IGMP fast leave | |
| Multicast VLAN | |
| MLD snooping | |
| IGMP proxy | |
| Controllable multicast | |
| Port-based multicast traffic statistics | |
| IGMP v1/v2/v3 | |
| PIM-SM, PIM-DM, and PIM-SSM | |
| MSDP | |
| MVPN | |
| QoS/ACL | Rate limiting on packets sent and received by an interface |
| Packet redirection | |
| Port-based traffic policing and two-rate three-color CAR | |
| Eight queues on each port | |
| WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms | |
| Re-marking of the 802.1p priority and DSCP priority | |
| Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID | |
| Rate limiting in each queue and traffic shaping on ports | |
| MPLS | MPLS, MPLS VLL, L3VPN |
| VPLS | Martini VPLS |
| Reliability | STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
| BPDU protection, root protection, and loop protection | |
| RRPP ring topology and RRPP multi-instance | |
| Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
| SEP | |
| ERPS (G.8032v2) | |
| BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM | |
| E-Trunk | |
| Security | User privilege management and password protection |
| DoS attack defense, ARP attack defense, and ICMP attack defense | |
| Binding of the IP address, MAC address, interface, and VLAN | |
| Port isolation, port security, and sticky MAC | |
| Blackhole MAC address entries | |
| Limit on the number of learned MAC addresses | |
| 802.1x authentication and limit on the number of users on an interface | |
| AAA authentication, RADIUS authentication and TACACS authentication | |
| SSH v2.0 | |
| Hypertext Transfer Protocol Secure (HTTPS) | |
| CPU defense | |
| Blacklist and whitelist | |
| Super Virtual Fabric (SVF) | Working as the parent node to vertically virtualize downlink switches as one device for management, supports two-layer clients architecture |
| Support as a client node to be managed by SVF parent | |
| Management and Maintenance | iStack (using service ports as stack ports) |
| MAC Forced Forwarding (MFF) | |
| Virtual cable test | |
| Ethernet OAM (IEEE 802.3ah and 802.1ag) | |
| Local port mirroring and Remote Switched Port Analyzer (RSPAN), allowing an observing port to forward packets | |
| Remote configuration and maintenance using Telnet | |
| SNMP v1/v2c/v3 | |
| RMON | |
| Web NMS | |
| System logs and alarms of different levels | |
| GVRP | |
| MUX VLAN | |
| Operating Environment | Operating temperature: 0m to 1,800m: 0°C to 45°C; 1,800m to 5,000m: 1°C decrease for every 220m increase in altitude |
| Relative humidity: 5% to 95% (non-condensing) | |
| Input Voltage | AC: |
| Rated voltage range: 100V to 240V, 50 Hz/60 Hz | |
| Maximum voltage range: 90V to 264V, 50 Hz/60 Hz | |
| Dimensions (W x D x H) | 442 mm x 420 mm x 44.4 mm |
| Typical Power Consumption | AC: |
| without subcard: 190W | |
| with subcard: 209W | |
The S6720-EI series switches are next-generation 10G box switches. The S6720-EI can function as an access switch in an Internet data center (IDC) or a core/aggregation switch on a campus network.
The S6720-EI has industry-leading performance, provides line-speed 10GE access ports and line-speed 40GE uplink ports. It can be used in a data center to provide 10 Gbit/s access to servers or function as a core switch on a campus network to provide 10 Gbit/s traffic aggregation. In addition, the S6720-EI provides a wide variety of services, comprehensive security policies, and various QoS features to help customers build scalable, manageable, reliable, and secure data centers.
S6720S-26Q-EI-24S is a compact switch with 220mm depth, perfectly suitable in a 300 mm deep cabinet, saving installation space for customers.
Contact Person: Laura
Tel: 15921748445
Fax: 86-21-37890191
